How to Move my Eldorado

First remove the rubber strips around the outside rail. They just press in so you can remove them by pressing a small flat head screwdriver up into the top (or bottom) edge of the metal channel. Be nice to them they will be a little brittle and you will want to reuse them.

Next unscrew the rails with a medium large philips head screw diver. There will be several of these screws along the side and end of the table. Use a sharpie to number the rails 1-6 and number the table where each rail goes back place.

Now get 4-5 friends and lift out the slate. Yes its heavy but it’ll come out all in one piece that is the beauty of an Irving Kaye!

Next remove the coin drawer. Use the keys or reach inside the table and you can remove the back of the cam locks with a screw driver.

Lay a moving blanket on the floor and lay the table on its side. There are two bolts that hold the legs in place. Remove the bolts with a crescent wrench and slide the leg assemblies out of the table.

Now you can move the table in pieces. The frame is actually fairly light. The top is easily managed by four to six people or four beefy movers.

When you get it home, reverse and enjoy!

By the way take pictures! and send them to me I will post them for others to see!